Martin Exterior Linear Pro DV (Direct View) QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output, color boost technology and discreet yet robust housings. They are specifically designed for direct view applications and are equipped with a round diffuser and segment control for low resolution content and their high lumen output makes them highly visible in daylight situations. They are perfect for soft, direct view lighting solutions enhancing ceilings, walls and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels or other applications needing similar lighting enhancements.
DV QUAD models feature homogenized color mixing with 8 LEDs/ft and an integrated color boosting feature for full powered illumination of a single color or mixed colors. Each unit is factory calibrated for superior color consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated.
Packed with intelligent features, these fixtures offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default color temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle color transitions.
With a high focus on sustainability, DV QUAD models can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy and a smart mounting plate design offers a variety of standard or custom bracket solutions.
The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.
...Martin Exterior Linear Pro DV (Direct View) QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output, color boost technology and discreet yet robust housings. They are specifically designed for direct view applications and are equipped with a round diffuser and segment control for low resolution content and their high lumen output makes them highly visible in daylight situations. They are perfect for soft, direct view lighting solutions enhancing ceilings, walls and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels or other applications needing similar lighting enhancements.
DV QUAD models feature homogenized color mixing with 8 LEDs/ft and an integrated color boosting feature for full powered illumination of a single color or mixed colors. Each unit is factory calibrated for superior color consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated.
Packed with intelligent features, these fixtures offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default color temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle color transitions.
With a high focus on sustainability, DV QUAD models can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy and a smart mounting plate design offers a variety of standard or custom bracket solutions.
The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.VIAC
FEATURES
Color-calibrated QUAD color LEDs (8 LEDs/ft)
Homogenous color mixing
Round diffuser for soft appearance and extended viewing angle
Dedicated color temperature control channel (1800K - 12000K)
Selectable segment modes (1, 4 or 8 segments)
Selectable power consumption (12W/10W/5W) per foot
Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
Hybrid power and data connector for easy daisy-chained configurations
DMX and RDM control
Integrated magnetic switch for local diagnostics
Rugged IP66 housing designed for permanent outdoor installations
Low weight 0.8 kg/ft (1.9 lbs/ft)
Compact design - 40mm (1.57 inch) width
PHYSICAL
Width: | 40 mm (1.57 inch.) |
Height: | 84 mm (3.31 inch.) |
Length - 1 ft Version: | 312mm (1.02 ft) |
Length - 4 ft Version: | 1227mm (4.02 ft) |
Weight - 1 ft Version: | 0.85 kg (1.9 lbs) |
Weight - 4 ft Version: | 2.8 kg (6.2 lbs) |
DYNAMIC EFFECTS
Color mixing: | RGBW |
Color temperature control: | 1800K – 12000K in 50K steps (default 4000K) |
Intensity: | 0 - 100% |
Segment Control: | 0.5ft, 1 ft or full 4 ft fixture control |
CONTROL AND PROGRAMMING
Control systems: | DMX, RDM |
Control resolution: | 8-bit DMX individual color control |
User interface: | Magnetic button to call up fixture status and test fixture |
Stand-alone control: | Up to 20 scenes with individual fade/hold times |
DMX compliance: | USITT DMX512/1990 |
RDM compliance: | ANSI/ESTA E1.20 |
Dimmer Resolution: | 16-bit DMX control of intensity |
DMX channels 4ft: | 6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg) |
DMX channels 1f
t: | 6/4/3/6 (standard/RAW/1 seg/2 seg) |
OPTICS
Light source: | QUAD color LED (8 LEDs per foot) |
Minimum LED lifetime: | 50 000 hours (to >70% luminous output)* |
Beam angle: | 180° |
Binning: | Tight color and flux binning |
Calibration: | Full Gamut Color Calibration (1 step MacAdam ellipse) |
*Figure obtained under manufacturer's test conditions
PHOTOMETRIC DATA
CRI (Color Rendering Index) : | >70 |
CCT: | 1800K – 12000K (default 4000K) |
Luminous output: | |
1 ft at 12W 4 ft at 12W
FULL: | 440 lumens 1770 lumens |
RED: | 150 lumens 690 lumens |
GREEN: | 330 lumens 1310 lumens |
BLUE: | 60 lumens 290 lumens |
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
CONSTRUCTION
Housing: | Aluminum |
Finish: | Clear anodized (standard) or optional colors on request |
Front: | Clear polycarbonate |
Protection rating: | IP66 |
IK rating: | IK08 |
Effective Projected Area (EPA): | 0.04 m2 per ft |
Corrosion resistance: | C5 - very high corrosivity / Durability Range | High (ISO 12944-6) |
Vibration resistance: | 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31) |
INSTALLATION
Orientation: | Any |
Minimum distance to illuminated surfaces: | 0.1 m / 0.3 ft. |
ELECTRICAL
AC power: | 100-277 V nominal, 50/60 Hz |
Typical half-cycle RMS inrush current: | 0.35 A |
Power supply unit: | Auto-ranging electronic switch-mode |
Surge protection: | 4KV |
Power/data in/thru: | 8-pin custom connectors |
Idle power consumption: | 1ft length | 1.54 W, 4ft length | 2.30W (steady state, all LEDs at zero intensity) |
Max earth leakage: | 1ft length | 0.15 mA, 4ft length | 0.21 mA |
Maximum connected 4ft fixtures*: | 42 pcs (52 m /169 ft) @ 230V-277V |
Maximum total string length (cable + fixtures)*: | 150 m / 328 ft |
* Refer to system diagram for details on fixture run limitations
TYPICAL POWER AND CURRENT
12W mode: | |
100-240 V, 50/60 Hz: | 12 W per foot +/- 1 W, PF 0.95 +/- 0.05 |
277 V, 50/60 Hz: | 12 W per foot +/- 1 W, PF 0.90 +/- 0.05 |
10W mode: | |
100-240 V, 50/60 Hz: | 10 W per foot +/- 1 W, PF 0.95 +/- 0.05 |
277 V, 50/60 Hz: | 10 W per foot +/- 1 W, PF 0.90 +/- 0.05 |
5W mode: | |
100-240 V, 50/60 Hz: | 5 W per foot +/- 0.5W, PF 0.90 +/- 0.05 |
277 V, 50/60 Hz: | 5 W per foot +/- 0.5W, PF 0.70 +/- 0.05 |
Power figures are typical, not maximum. Measurements made at nominal voltage. Allow for +/- 10% deviation. PF = Power factor.
THERMAL
Cooling: | Convection |
Total heat dissipation (calculated, +/- 10%): | 41 BTU/hr. per foot |
Maximum ambient temperature: | 45° C (113° F)* |
Minimum ambient temperature: | -30° C (-22° F) |
*Above this temperature, the fixture regulates output to protect from overheating
ENVIRONMENTAL
RoHS: | Compliant |
REACH: | Compliant |
WEEE: | Compliant |
Proposition 65: | Compliant |
FSC: | Certified cardboard inlay and outer packaging |
Efficacy (max output): | 37 lm/W |
LWR*: | 529 lm/kg (237 lm/lb) |
*LWR = Lumen-to-Weight Ratio
APPROVALS
Global CB Certification/IECEE: | IEC 60598-2-5 (IEC 60598-1) |
EU safety: | EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 |
EU EMC: | EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 |
US safety: | ANSI/UL 1598 |
US EMC: | 47 CFR Part 15 Class B |
Canadian safety: | CSA C22.2 No. 250.0 |
Australia/NZ: | RCM |
India: | BIS IS 10322(Part5/section5) |
RELATED ITEMS
Martin Companion Cable: | P/N MAR-91616091 |
Martin Companion Cable (for firmware update over DMX): | Free download from www.martin.com |
ACCESSORIES
Glare shield, EL Pro 1ft set of 4: | P/N MAR-90570022 |
Glare shield, EL Pro, 4ft set of 4: | P/N MAR-90570023 |
Adjustable bracket EL Pro 10 pcs: | P/N MAR-90570025 |
Flange bracket EL Pro 10 pcs: | P/N MAR-90570026 |
Quick mount bracket EL Pro 10 pcs: | P/N MAR-90570027 |
Junction Box Power DMX to PD: | P/N MAR-91700019 |
Power DMX Cable PD PD 0.2M EU: | P/N MAR-91700004 |
Power DMX Cable PD PD 1M EU: | P/N MAR-91700005 |
Power DMX Cable PD PD 2.5M EU: | P/N MAR-91700006 |
Power DMX Cable PD PD 5M EU: | P/N MAR-91700007 |
Power DMX Cable PD PD 10M EU: | P/N MAR-91700008 |
Power DMX Cable 100M Roll EU: | P/N MAR-91700009 |
Power DMX Cable PD PD 0.2M US: | P/N MAR-91700010 |
Power DMX Cable PD PD 1M US: | P/N MAR-91700011 |
Power DMX Cable PD PD 2.5M US: | P/N MAR-91700012 |
Power DMX Cable PD PD 5M US: | P/N MAR-91700013 |
Power DMX Cable PD PD 10M US: | P/N MAR-91700014 |
End termination cap PD: | P/N MAR-91700015 |
Power DMX Cable 100M Roll US: | P/N MAR-91700016 |
Bulk connector PD female: | P/N MAR-91700017 |
Bulk connector PD male: | P/N MAR-91700018 |
ORDERING INFORMATION
Exterior Linear Pro DV QUAD 1ft: | P/N MAR-90570002 |
Exterior Linear Pro DV QUAD 4ft: | P/N MAR-90570005 |
VIAC